 |
 |
|
Karndean
A2
Adhesive
Spreader |
|
|
|
Used to spread
adhesive onto
the subfloor |
|
£3.40 |
|
|
|
|
|
|
|
Karndean
Epoxy
Adhesive
4kg |
|
|
|
A two part
adhesive
providing an
exceptionally
strong bond.
Recommended for
areas subject to
excessive
moisture. Covers
approx. 15m² |
|
£35.99 |
|
|
|
|
|
|
|
Karndean
High
Temperature
Adhesive
5 litre |
|
|
|
A modified
adhesive with a
service
temperature of
50C, whereas
other adhesives
supplied allow
40C. Ideal for
rooms with
excessive heat,
eg.
Conservatories
or rooms with
under floor
heating. Covers
approx. 17m² |
|
|
|
|
|
|
|
|
|
Karndean
High
Temperature
Adhesive
15 litre |
|
|
|
A modified
adhesive with a
service
temperature of
50C, whereas
other adhesives
supplied allow
40C. Ideal for
rooms with
excessive heat,
eg.
Conservatories
or rooms with
under floor
heating. Covers
approx. 50m² |
|
|
|
|
|
|
|
|
|
Karndean
Pressure
Sensitive
Adhesive
2.5
litre |
|
|
|
Suitable for use
in normal
conditions,
excluding areas
subject to
excessive
temperature and
moisture. Covers
approx. 10m² |
|
|
|
|
|
|
|
|
|
Karndean
Pressure
Sensitive
Adhesive
5 litre |
|
|
|
Suitable for use
in normal
conditions,
excluding areas
subject to
excessive
temperature and
moisture. Covers
approx. 20m² |
|
|
|
|
|
|
|
|
|
Karndean
Pressure
Sensitive
Adhesive
15 litre |
|
|
|
Suitable for use
in normal
conditions,
excluding areas
subject to
excessive
temperature and
moisture. Covers
approx. 50m² |
|
|
|
|
|
|
|
|
|
|
|
A rapid drying
floor finishing
compound -
designed to be
used over wood
and cementitious
bases. Covers
approx. 25 m² |
|
|
|
|
|
Epoxy
Resin
Epoxy resin is a two-part mix. Both
components should be mixed together with
a drill and paddle to a smooth
consistency and the contents poured out
within 5 minutes of mixing time. If left
within the container the resin will
harden inside 15 minutes; on the floor
you have up to 2 hours working time.
Recommended for areas subject to
excessive moisture.
Any areas under question consult
MW Floors.
High Temperature Adhesive (HT)
A modified Acrylic adhesive with an
improved service temperature. For use in
areas subject to excessive heat eg.
conservatories, shop windows, patio
doors (and other areas subject to direct
sunlight), and under floor heating. We
always recommend that you work section
by section, as product must be wet
bonded when installed with this adhesive
(the open time is approximately
15 minutes, depending on atmospheric
conditions).
Special note about conservatories:
It is particularly necessary to keep the
temperature in conservatories at a
constant 18°-26° prior to, during, and
for 24 hours after installation. It
would also be advisable to shade windows
to ensure that constant temperature
conditions are maintained.
Acrylic
Ideal for use in most normal residential
and commercial installations. We always
recommend that you work section by
section, as product must be wet bonded
when installed with this adhesive (the
open time is approximately
15 minutes, depending on atmospheric
conditions).
Pressure Sensitive adhesive (PS)
Ideal for use in most normal residential
and commercial installations. For best
working practice a semi-dry to dry tack
is used. The open time of Karndean PS is
approximately 5 hours. Important: An A2
trowel must be used to apply PS
adhesive.
IMPORTANT:
We must insist that all Karndean
Flooring products are laid using only
Karndean adhesive, available in various
sizes for your convenience.
|
